Rockwell-automation 20D-DL2-ENETO DriveLogix 5730 Controller Embedded Manual de usuario descargar pdf (Pagina 2)

2 Embedded EtherNet/IP Option Card for DriveLogix™5730 Controllers

What You Need to Do

To remove a Embedded EtherNet/IP Option Card from a PowerFlex 700S

drive:

❐ Step 1: Remove power from the drive

❐ Step 2: Open the main drive door

❐ Step 3: Remove the control cassette from the drive

❐ Step 4: Remove the inside cover from the control cassette

❐ Step 5: Remove the old Embedded EtherNet/IP Option Card from the

drive

To install a new Embedded EtherNet/IP Option Card onto a PowerFlex

700S drive:

❐ Step 6: Install the Embedded EtherNet/IP Option Card

❐ Step 7: Replace the covers and control cassette

❐ Step 8: Configure EtherNet/IP communications

❐ Step 9: Document revision changes

To return a replaced Embedded EtherNet/IP Option Card, use packing

material from the new Embedded EtherNet/IP Option Card.

1 2 3 4 5 6 7 8

Sin comentarios

Rockwell-automation 20D-DL2-ENETO DriveLogix 5730 Controller Embedded Manual de usuario Pagina 2