Rockwell-automation 20L PowerFlex 700L Drive Cooling Loop Hose Kit Manual de usuario Pagina 1

Busca en linea o descarga Manual de usuario para Equipo Rockwell-automation 20L PowerFlex 700L Drive Cooling Loop Hose Kit. Rockwell Automation 20L PowerFlex 700L Drive Cooling Loop Hose Kit User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 2
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
Installation Instructions
PowerFlex
®
700L
Drive Cooling Loop Hose Kit
What This Kit Includes
Two hoses
Two drive side couplings
Two heat exchanger side couplings
Two male 1 inch-to-1 inch elbows 37°
(only included with 20L-GHxx-A2 hose kits)
Tools That You Need
Liquid soap
Tightening wrench
Backup wrench
Step 1: Attaching a
Coupling to a Hose
A. Lubricate the inside of the hose end with a small amount of liquid soap.
B. Set the coupling down on a solid surface and push the hose onto the
coupling — in one firm push — until the hose end is flush against the
plastic bushing. Stopping before the hose is fully on may make it
difficult to push the hose completely onto the coupling.
Step 2: Connecting an
Elbow to a Pipe Nipple
(only 20L-GHxx-A2 Kits)
To use a 13 kW capacity PowerFlex 700L Liquid-to-Liquid Heat Exchanger
(catalog number 20L-LL13K-P75A) with a PowerFlex 700L Frame 3A
drive, the 20L-GHxx-A2 hose kit comes with 1-inch elbows that must be
exchanged for the elbows provided with the heat exchanger.
A. Use a 1-3/8 inch or adjustable wrench to remove the 1 inch-to-3/4 inch
reducers and 3/4 inch elbows already assembled on the heat exchanger at
the "TO DRIVE INLET" and "FROM DRIVE OUTLET" connections.
(There is no need to use a backup wrnech on the pipe nipple.)
Hose End
Attached
Solid Surface
Coupling
Vista de pagina 0
1 2

Indice de contenidos

Pagina 1 - Drive Cooling Loop Hose Kit

Installation InstructionsPowerFlex® 700L Drive Cooling Loop Hose KitWhat This Kit Includes• Two hoses• Two drive side couplings• Two heat exchanger

Pagina 2 - Step 3: Attaching the

www.rockwellautomation.comAmericas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 4

Comentarios a estos manuales

Sin comentarios