Rockwell-automation 20P PowerFlex DC Drive - Frame C Cooling Fan Manual de usuario descargar pdf (Pagina 3)

PowerFlex® DC Drive - Frame C Cooling Fan 3

3. Loosen, but do not remove, the screws that secure the top cover to the

drive, then slide the cover up and off the drive chassis.

Important: The HIM assembly is connected via a cable to the Control

board and therefore will not pull free from the drive until

disconnected. See step 4 below for instructions.

4. Disconnect the HIM Communication cable from the connector on the

upper right corner of the Control board and set the cover aside.

STS

PORT

MOD

NET A

NET B

FU1 FV1

Tightening torque:

1.5 N-m (13.3 lb.-in.)

Pull tabs out

to disconnect

cable.

1 2 3 4 5 6 7 8 9 10

Sin comentarios

Rockwell-automation 20P PowerFlex DC Drive - Frame C Cooling Fan Manual de usuario Pagina 3