Rockwell-automation 20P PowerFlex DC Drive - Frame D Field SCR Module Manual de usuario descargar pdf

Publication 20P-IN055A-EN-P

PowerFlex® DC Drive

Frame D Field SCR Module

Installation Instructions

What This Kit Includes

• Field SCR module

• Gate lead cables (2)

• Screws and washers (2)

• Thermal grease

• Static strap

Important:It is highly recommended that the field circuit board and field dual

diode module be replaced when replacing the field SCR module.

The field circuit board and field dual diode module are sold as

separate spare part kits.

Tools That You Need

• Phillips

screwdriver

• Hexalobular screwdriver

Phillips

is a registered trademark of Phillips Screw Company.

ATTENTION: Only qualified personnel familiar with DC drives

and associated machinery should plan or implement the installation,

start-up and subsequent maintenance of the system. Failure to comply

may result in personal injury and/or equipment damage.

ATTENTION: To avoid an electric shock hazard, ensure that all

power to the drive has been removed before performing the following.

ATTENTION: This drive contains ESD (Electrostatic Discharge)

sensitive parts and assemblies. Static control precautions are required

when installing, testing, servicing or repairing this assembly.

Component damage may result if ESD control procedures are not

followed. If you are not familiar with static control procedures,

reference A-B publication 8000-4.5.2, “Guarding Against

Electrostatic Damage” or any other applicable ESD protection

handbook.

1 2 3 4 5 6 7 8

Indice de contenidos

Pagina 1 - Installation Instructions

Publication 20P-IN055A-EN-PPowerFlex® DC DriveFrame D Field SCR ModuleInstallation InstructionsWhat This Kit Includes• Field SCR module• Gate lead cab

Pagina 2 - Protective Covers

Publication 20P-IN055A-EN-P2What You Need to DoTo install the field SCR module:❐ Step 1: Remove power from the drive❐ Step 2: Remove the protective co

Pagina 3 - Figure 1 Cover Removal

3Publication 20P-IN055A-EN-PImportant:A communication cable connects the HIM assembly to the Control board mounted on the control pan. Therefore, the

Pagina 4 - Step 3: Remove the Field

Publication 20P-IN055A-EN-P44. Disconnect the HIM communication cable from the connector on the upper right corner of the Control board and remove the

Pagina 5 - Publication 20P-IN055A-EN-P

5Publication 20P-IN055A-EN-PImportant: Mark all connections and wires before removal to avoid incorrect wiring during reassembly.2. Disconnect the cab

Pagina 6 - Existing Field SCR Module

Publication 20P-IN055A-EN-P6Step 4: Remove the Existing Field SCR Module1. Disconnect the gate lead wires from the connectors at the top of the SCR mo

Pagina 7 - Step 6: Install the Field

7Publication 20P-IN055A-EN-P2. Remove the two screws and washers that secure the SCR module to the heatsink and remove the module.Figure 4 Field SCR

Pagina 8 - Related Documentation

Comentarios a estos manuales

Sin comentarios

Rockwell-automation 20P PowerFlex DC Drive - Frame D Field SCR Module Manual de usuario

Busca en linea o descarga Manual de usuario para Equipo Rockwell-automation 20P PowerFlex DC Drive - Frame D Field SCR Module. Rockwell Automation 20P PowerFlex DC Drive - Frame D Field SCR Module User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation 20P PowerFlex DC Drive - Frame D Field SCR Module