Rockwell-automation 284D ArmorStart - Getting Started Manual de usuario descargar pdf (Pagina 20)

Publication 284D-QS001D-EN-P - July 2006

Figure 13 Jumper Removal

LED Status Indication The LED Status Indication provides 4 status LEDs and a Reset button. The

LEDs provide status indication for the following:

• POWER LED

The LED is illuminated solid green when control power is present and

with the proper polarity

•RUN LED

This LED is illuminated solid green when a start command and control

power are present

• NETWORK LED

This bi-color (red/green) LED indicates the status of the

communication link

• FAULT LED

Indicates Controller Fault (trip) condition

The “Reset Button” as a local trip reset.

ATTENTION

Do not remove this jumper if the unit is equipped with an

EMI filter installed.

Remove Jumper

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Sin comentarios

Rockwell-automation 284D ArmorStart - Getting Started Manual de usuario Pagina 20