Rockwell-automation 4100-IF2 IF2 I/O Interface to PDM Installation Ins Manual de usuario Pagina 1

Publication 4100-IN001A-EN-P- February 2001Installation InstructionsIF2 I/O Interface to PDM (Catalog Number 4100-IF2)The IF2 I/O Interface to PDM is

10 IF2 I/O Interface to PDM Publication 4100-IN001A-EN-P- February 2001 Wiring the P1 ConnectorThe PDM side is designed to connect directly on

IF2 I/O Interface to PDM 11Publication 4100-IN001A-EN-P- February 2001Conductor size must not be greater than 1.5 mm2. The I/O circuits in the

Publication 4100-IN001A-EN-P- February 2001 957464-20Supersedes Publication 68-0060 – January 1997  2001 Rockwell International. All Rights Res

2 IF2 I/O Interface to PDM Publication 4100-IN001A-EN-P- February 2001 Important User InformationThose responsible for the application and use

IF2 I/O Interface to PDM 3Publication 4100-IN001A-EN-P- February 2001Allen-Bradley SupportAllen-Bradley offers support services worldwide, with

4 IF2 I/O Interface to PDM Publication 4100-IN001A-EN-P- February 2001 Compliance to the European Union DirectiveThis product doesn’t bear the

IF2 I/O Interface to PDM 5Publication 4100-IN001A-EN-P- February 2001For specific information required by EN 60204, see the appropriate section

6 IF2 I/O Interface to PDM Publication 4100-IN001A-EN-P- February 2001 OverviewThe IF2 I/O Interface to PDM is a printed circuit board intended

IF2 I/O Interface to PDM 7Publication 4100-IN001A-EN-P- February 2001InstallationThe interface is a DIN rail mounting unit which has a terminal

8 IF2 I/O Interface to PDM Publication 4100-IN001A-EN-P- February 2001 WiringThe flying leads from the PDM drive is wired to the IF2 I/O Interf

IF2 I/O Interface to PDM 9Publication 4100-IN001A-EN-P- February 20013. Using a small, flat-head screwdriver, turn the clamping screw counter-c