Rockwell-automation 445L Installation and Operating Instructions Manual de usuario descargar pdf (Pagina 16)

Muting Controller Box Installation and Operating Instructions

Original instructions

Indication

Safety Light Curtain

The green LED on the receiver light curtain indicates under normal operation if the protective field is uninterrupted. See corresponding

light curtain manual.

Muting Sensor

Muting Box

GuardShield Safe 4, GuardShield Safe 2

Emitter LED = green on Normal operation

Receiver LED = green on Protective field is uninterrupted

LED = red on Protective field is interrupted.

GuardShield Micro 400

LED = green on Protective field is uninterrupted

LED = red on Protective field is interrupted.

LED = Flashing red Lock out condition

LED = Flashing green Low light intensity

Note: If the LED is flashing green, optimal alignment has not

been attained. Continue adjusting the Micro 400 until a

solid green LED is visible.

Check the sensor manual for LED indication.

The yellow LED on the RightSight sensor indicates correct

alignment of an uninterrupted beam. If the orange LED is off, the

intensity is too low and the beam should be readjusted.

Three indicators showing the condition of the muting box.

Muting lamp off

white on

white flashing

Safety light curtain is active

Safety light curtain is muted

Muting sequence error

Output status off

green on

OSSD output = off

OSSD output = on

Error status off

green on

Lockout

POWER

Emitter

Power on

(orange)

POWER

Receiver

Power on

(orange)

Output active

(green)

Output inactive

(red)

Normal operation

(green)

TEST

Test input

(red)

OptiLink

(IR light)

OptiLink

(IR light)

ATTENTION

The status output are driven from the MSR42 output info 1 and 2. The meaning of the indication can be

changed according to the configuration downloaded for the MSR42 (see Software and Optical Interface

section).

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Comentarios a estos manuales

Sin comentarios

Rockwell-automation 445L Installation and Operating Instructions Manual de usuario Pagina 16

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation 445L Installation and Operating Instructions