Rockwell-automation 6180 Processor Board (for 6180 Industrial Computer Manual de usuario descargar pdf (Pagina 16)

2–5Processor Board

CPU/System Speed Settings

CPU Frequency

(MHz)

Host Bus

Frequency

(MHz)

Jumper

J7K1-C

Jumper

K7K1-D

CPU Clock

Multiplier

Jumper

J7K1-B

200 66 1-2, 5-6 1-2, 5-6 3

166 66 1-2, 5-6 2-3, 5-6 2.5

150 60 2-3, 4-5 2-3, 5-6 2.5

133 66 1-2, 5-6 2-3, 4-5 2.5

The STD/VRE

setting

120 60 2-3, 4-5 2-3, 4-5 2

setting

depends on

100 66 1-2, 5-6 1-2, 4-5 2

depends on

5 for STD,

90 60 2-3, 4-5 1-2, 4-5 1.5

-5

STD

5-6 for VRE

75 50 2-3, 5-6 1-2, 4-5 1.5

for

VRE

Reserved - 2-3, 5-6 1-2, 5-6

Reserved - 2-3, 4-5 1-2, 5-6

BIOS Recovery (Jumper J1F1 / Pins 1,2,3)

It is unlikely that a BIOS Flash Upgrade process would be

interrupted. However, if an interruption occurs that prevents the

upgrade from continuing, you may need to use the BIOS recovery.

Moving the jumper from pins 1-2 (Normal Operation) to pins 2-3

(Recovery) and then turning the system on loads the BIOS upgrade

from a diskette in the floppy drive. After recovery, the upgrade

process can be continued.

J1F1

Recovery Disabled

J1F1

Recovery Enabled

Clear CMOS (Jumper J7K1-A / Pins 4,5,6)

Moving the jumper from pins 4-5 (Keep) to pins 5-6 (Clear) and then

turning the system on, resets the CMOS settings to default

values.

Keep CMOS

Clear CMOS

After the system indicates “NVRAM Cleared by Jumper”, turn the

system off and return the jumper to the 4-5 position.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 38 39

Comentarios a estos manuales

Sin comentarios

Rockwell-automation 6180 Processor Board (for 6180 Industrial Computer Manual de usuario Pagina 16

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation 6180 Processor Board (for 6180 Industrial Computer