Rockwell-automation 6180 Processor Board (for 6180 Industrial Computer Manual de usuario descargar pdf (Pagina 17)

2–6 Processor Board

Clear Password (Jumper J7K1-A / Pins 1,2,3)

Moving the jumper from pins 1-2 (Password Enabled) to pins 2-3

(Password Clear) and then turning the system on, clears the system

password.

Password Enabled

Password Clear

After clearing the password, turn the system off and then change the

jumper back to pins 1-2. Only clear the password if the user

password has been forgotten. Leaving the jumper in the pin 2-3

position disables the password.

BIOS Setup Access (Jumper J7K1-B, Pins 1,2,3)

Moving the jumper from pins 1-2 to pins 2-3 disables access to the

BIOS Setup program.

Disable BIOS Access

Enable BIOS Access

CMOS access enabled (pins 1-2) is the default position.

STD/VRE (Jumper J7K1-B, Pins 4,5,6)

This jumper controls the voltage level to the PentiumR processor.

Different speeds or stepping of Pentium processors may require a

different voltage setting. The voltages are as follows:

• STD: 3.135V – 3.6V

• VRE: 3.4V – 3.6V

VRE

STD

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 38 39

Sin comentarios

Rockwell-automation 6180 Processor Board (for 6180 Industrial Computer Manual de usuario Pagina 17