Rockwell-automation 931S-C2R1D-DC2R Isolator, Limit Value Monitoring Manual de usuario descargar pdf (Pagina 3)

1. General instructions

• Disconnect power prior to installation

• Installation only by Qualified personnel

• Follow all applicable local and national electrical codes

• Due to potential hazardous voltages in close proximity, use a non-

conductive tool and proper PPE when adjusting the potentiometers

on the front panel.

For applications with high isolation voltages, take measures to prevent ac-

cidental contact and make sure that there is sufficient distance or insulation

between adjacent devices!

Appropriate safety measures against electrostatic discharge

(ESD) should be taken during assembly and adjustment work on

the 931S-C2R1D-DC2R.

2. Application

The 3 Way Limit Value Monitoring Isolator 931S-C2R1D-D2CR is designed

for monitoring standard voltage and current signals. The input signal and

the switching parameters can be calibrated/switched via DIP switches. It is

not necessary to adjust the pre-settable measurement ranges. The

hysteresis and signal threshold for the respective range can be set using

potentiometers.

WARNINGWARNINGWARNINGWARNING

1 2 3 4 5 6 7 8 ... 27 28

Sin comentarios

Rockwell-automation 931S-C2R1D-DC2R Isolator, Limit Value Monitoring Manual de usuario Pagina 3