Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 525 D Manual de usuario descargar pdf (Pagina 18)

18 Rockwell Automation Publication IASIMP-QS036A-EN-P - April 2013

Chapter 1 Prepare the PowerFlex 525 Drive Hardware

13. To permanently assign this

configuration to the adapter,

wait for the adapter to appear

in the Relation List panel and

select it.

14. Click Disable BOOTP/DHCP.

When power is cycled, the adapter uses the assigned configuration and does not issue a BOOTP request.

Additional Resources

For a list of additional resources that can assist you when preparing the PowerFlex 525 drive hardware, see

page 10.

IMPORTANT

If you do not click Disable BOOTP/DHCP, on a power cycle, the host controller clears the current IP configuration

and begins sending BOOTP requests again.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Sin comentarios

Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 525 D Manual de usuario Pagina 18