Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 525 D Manual de usuario descargar pdf (Pagina 24)

24 Rockwell Automation Publication IASIMP-QS036A-EN-P - April 2013

Chapter 2 Add a PowerFlex 525 Drive to a Controller Project

When the connection is complete, the Upload dialog box appears.

15. Click Upload Entire Device.

An Upload dialog box appears and

shows the progress of the upload.

If there are any differences between the

drive in your project and the drive to

which you are connecting, a Module

Definition Differences Found dialog

box appears and shows the differences. If

this is the drive you want to add to your

project, click OK. Otherwise, click

Cancel and repeat step 12 through step

15.

16. When the Module Definition dialog box

appears, click OK.

The PowerFlex 525 is added to the

controller organizer under the network

port.

17. Save the project.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Sin comentarios

Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 525 D Manual de usuario Pagina 24