Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 70 Dr Manual de usuario descargar pdf (Pagina 18)

18 Rockwell Automation Publication IASIMP-QS031A-EN-P - February 2012

Chapter 1 Prepare the PowerFlex 70 Drive Hardware

Configure the EtherNet/IP Adapter

The PowerFlex 70 EtherNet/IP network adapter requires a network IP address to operate on an

EtherNet/IP network. You use the BOOTP/DHCP server to assign an IP address.

1. Retrieve the MAC ID you recorded in step 1 on page 17

2. Start the BOOTP/DHCP utility.

3. From the Tools menu, choose

Network Settings.

4. Type the Subnet Mask of

the network.

The Gateway address, Primary

and/or Secondary DNS address,

and Domain Name fields are

optional.

5. Click OK.

The Request History panel appears with the hardware addresses of all devices issuing

BOOTP requests.

6. Select the appropriate device, that

is, the device with the MAC ID

that matches your PowerFlex 70

drive.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

Sin comentarios

Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 70 Dr Manual de usuario Pagina 18