Rockwell-automation T813X Trusted Processor Interface Adaptor Manual de usuario descargar pdf (Pagina 9)

Trusted

Interface Adapter T813X

Issue 3 Aug 06 PD-T813X 9

1.2. Fault/Fail Connectors (J2 & J3)

J2 and J16 are Phoenix contact 2.5mm pitch connectors.

Pin Service

1 FAULT_n_NC

2 FAULT_n_COMMON

3 FAULT_n_NO

4 FAIL_n_NC

5 FAIL_n_COMMON

6 FAIL_n_NO

Table 2 Fault/Fail Connectors

Note: n=1 for connector J2 and 2 for connector J3 providing fault and fail connections for the Active

and Standby processors respectively. FAULT opens on any system fault which sets the

Processor Healthy LED red. FAIL opens on shutdown of the Processor.

1.3. Diagnostic Connector (J4)

J4 is a Phoenix contact 2.5mm pitch connector. This port is not for operational use.

Pin Service

1 DIAG_RTN

2 DIAG_IN_1

Table 3 Diagnostic Connector

1.4. PSU Shutdown Monitor Connector (J6)

J6 is Phoenix contact 2.5mm pitch connector. These two system inputs are made available to the

application on the Processor’s complex I/O equipment definition. The inputs expect volt-free contacts

to the RTN pin.

Pin Service

1 24V_PSU1_SHUTDOWN

2 24V_PSU2_SHUTDOWN

3 24V_RTN

Table 4 PSU S/D Monitor Connectors

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Sin comentarios

Rockwell-automation T813X Trusted Processor Interface Adaptor Manual de usuario Pagina 9