Rockwell-automation 1326AB, 845H Encoder Feedback Adapter Kit Manual de usuario

Busca en linea o descarga Manual de usuario para Equipo Rockwell-automation 1326AB, 845H Encoder Feedback Adapter Kit. Rockwell Automation 1326AB, 845H Encoder Feedback Adapter Kit User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 3
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
ALLEN-BRAD-
LEY
Instructions
1326AB Encoder Feedback
Mounting Adapter Kit
(Cat. No. 1326AB-MOD-Mxx)
Introduction This publication will guide you through installation of the 1326AB
Encoder Mounting Adapter to a 1326AB Servomotor.
Using the information below, verify that you have received the correct kit
for the motor being used.
Adapter Kit No. Use to couple an 845H Encoder to . . .
1326AB-MOD-M40 * 1326AB-B4xxx-21, -A4xxx-21 and -Axx-xx Series Motor
1326AB-MOD-M50 * 1326AB-B5xxx-21, -A5xxx-21 and -Bxx-xx Series Motor
1326AB-MOD-M60 * 1326AB-B7xxx-21, -A7xxx-21 and -Cxx-xx Series Motor
* 1326-MOD-Mxx replaces the 1326AB-MOD-Mxx-C1 and 1326AB-MOD-Mxx-C3, however will
accept the 845H encoder only.
The components contained in each kit include:
(1) Encoder Mounting Adapter w/Servo Clamps
(1) Flexible Coupling
(1) Allen Wrench, Coupling
(3) Mounting Screws, Adapter
The following items may be required for installation.
0.375-18 Pip Head Driver
Standard Screwdriver
#10-32 Hex Head Driver
Run-Out Indicator
Installation Important: This adapter is designed to accept Allen-Bradley 845H
encoders Only
.
WARNING: If the motor is currently wired into a system,
assure that all power to the motor has been removed before
installing the adapter to avoid a shock hazard.
!
Vista de pagina 0
1 2 3

Indice de contenidos

Pagina 1 - Mounting Adapter Kit

ALLEN-BRAD-LEYInstructions1326AB Encoder FeedbackMounting Adapter Kit(Cat. No. 1326AB-MOD-Mxx)Introduction This publication will guide you through ins

Pagina 2 - Instructions

1326A Encoder Feedback Mounting AdapterInstructions2o 1. Remove the backplate from the end of the motor.o 2. Thoroughly clean the shafts, coupling bor

Pagina 3

1326A Encoder Feedback Mounting AdapterInstructions3o 8. Tighten the coupling onto the encoder shaft. Replace inspection plug.Important: Assure that t

Comentarios a estos manuales

Sin comentarios