Rockwell-automation 1394 Upgrading Your Axis Module Manual de usuario

Publication 1394–6.2 – March 1997   This kit contains the information and procedures necessary toupgrade your 1394–AM50, 1394–A

Upgrading your Axis Module10Publication 1394–6.2 – March 1997

Upgrading your Axis Module 11Publication 1394–6.2 – March 1997

Upgrading your Axis Module12Publication 1394–6.2 – March 1997Publication 1394–6.2 – March 1997 PN 74102–133–01Copyright 1997 Rockwell Automation Pr

Upgrading your Axis Module2Publication 1394–6.2 – March 19973. Remove connectors (TB1 and TB2) from the bottom of the axismodule.4. Label and remove

Upgrading your Axis Module 3Publication 1394–6.2 – March 1997terminal and wear it at all times during this procedure.43653. Remove these two M3 x 6 m

Upgrading your Axis Module4Publication 1394–6.2 – March 19977. Once all of the screws have been removed, take off the cover ofthe module.8. Go to Ins

Upgrading your Axis Module 5Publication 1394–6.2 – March 1997Bottom of Axis Module44. Unplug the green wire labeled PE2.Bottom of Axis Module565. Plu

Upgrading your Axis Module6Publication 1394–6.2 – March 1997Bottom of Axis Module77. Plug the green wire labeled PE2 into the terminal on thegroundin

Upgrading your Axis Module 7Publication 1394–6.2 – March 199732542. Fasten these two M3 x 6 mm flat head screws.3. Fasten these two M4 x 10 mm pan he

Upgrading your Axis Module8Publication 1394–6.2 – March 1997Re-mounting the Axis ModuleTo re-mount the axis module:1. Install the top mounting fasten

Upgrading your Axis Module 9Publication 1394–6.2 – March 1997