Rockwell-automation 1394 Upgrading Your Axis Module Manual de usuario descargar pdf (Pagina 4)

Upgrading your Axis Module4

Publication 1394–6.2 – March 1997

7. Once all of the screws have been removed, take off the cover of

the module.

8. Go to Installing the Ground Wire.

Installing the Ground Wire

1. Remove these two M4 x 10 mm pan head screws.

2. Cut and remove a 12 mm (0.5 in) diameter piece of the Mylar

sheet around each screw hole.

3. Install one of the M4 x 12 mm flat head screws included with the

kit.

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Rockwell-automation 1394 Upgrading Your Axis Module Manual de usuario Pagina 4