Rockwell-automation 1394 Upgrading Your Axis Module Manual de usuario descargar pdf (Pagina 3)

Upgrading your Axis Module 3

Publication 1394–6.2 – March 1997

terminal and wear it at all times during this procedure.

3. Remove these two M3 x 6 mm flat head screws.

4. Remove these two M4 x 10 mm pan head screws.

5. Remove these six M3 x 6 mm flat head screws (three on each

side). Do not disconnect the face assembly from the board.

6. Remove these two M3 x 6 mm flat head screws.

1 2 3 4 5 6 7 8 ... 11 12

Sin comentarios

Rockwell-automation 1394 Upgrading Your Axis Module Manual de usuario Pagina 3