Rockwell-automation 1440-TB-H XM-947 Dynamic Vibration Terminal Base Manual de usuario descargar pdf (Pagina 15)

XM-947 Dynamic Vibration Terminal Base 15

Publication

GMSI10-IN027A-EN-P - May 2010

Terminal Assignments

XM-160 Direct Vibration Module Terminal Assignments

WARNING

EXPLOSION HAZARD

Do not disconnect equipment unless power has been removed

or the area is known to be nonhazardous.

Do not disconnect connections to this equipment unless power

has been removed or the area is known to be nonhazardous.

Secure any external connections that mate to this equipment by

using screws, sliding latches, threaded connectors, or other

means provided with this product.

ATTENTION

The terminal block assignments are different for different

terminal base units. The following tables apply only to the

XM-947. Refer to the installation instructions for the specific

terminal base unit for its terminal assignments.

No. Description No. Description

0 Chassis 26 Channel 4 Buffer Out

1 Chassis 27 Channel 5 Signal In

2 Chassis 28 Channel 5 Buffer Out

3 Signal Common 29 Channel 6 Signal In

4 Signal Common 30 Channel 6 Buffer Out

5 Signal Common 31 No Connection

6 Signal Common 32 No Connection

7 Signal Common 33 No Connection

8 Signal Common 34 No Connection

9 Signal Common 35 No Connection

10 Signal Common 36 No Connection

11 Signal Common 37 +24V In

12 Signal Common 38 24V Common

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Sin comentarios

Rockwell-automation 1440-TB-H XM-947 Dynamic Vibration Terminal Base Manual de usuario Pagina 15