Rockwell-automation 1502 Electrically-Held to Mechanically Latched Con Manual de usuario descargar pdf (Pagina 10)

6 Electrically Held to Mechanical Latch Contactor • Retrofit Instructions

1502-IN001%-EN-P –-XQH

Auxiliary Contact Assembly Set-Up

1. Clamp the contactor closed from the back of the unit, using a

C-Clamp (or clamping fixture, part no. 80154-149-51).

2. Insert a 0.030” (0.76 mm) feeler gauge between the plastic

auxiliary contact actuator and the steel actuator plate.

(See Figure 8)

Figure 8 – Set-up of the Auxiliary Contact Assembly

3. Slide the assembly fully forward, until the contacts have fully

engaged.

4. Secure the assembly in place by tightening the auxiliary assembly-

retaining bolt.

1 2 ... 5 6 7 8 9 10 11 12 13 14

Sin comentarios

Rockwell-automation 1502 Electrically-Held to Mechanically Latched Con Manual de usuario Pagina 10