Rockwell-automation 1502 Electrically-Held to Mechanically Latched Con Manual de usuario descargar pdf (Pagina 8)

4 Electrically Held to Mechanical Latch Contactor • Retrofit Instructions

1502-IN001%-EN-P –-XQH

Figure 5 – Contactor (Front/bottom View)

Showing Mounting Bolts for Latch Mechanism

A T T E N T I O NA T T E N T I O N

The return springs exert a significant force on the

armature plate. To avoid injury, do not place fingers

between the armature plate and the stop bracket at

any time.

5. Position the clamp plate under the base of the contactor so that the

three holes in the latch mechanism align with the slots in the

contactor molding and the holes in the clamp plate. Hand tighten

the three mounting bolts to hold the mechanism in position.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Sin comentarios

Rockwell-automation 1502 Electrically-Held to Mechanically Latched Con Manual de usuario Pagina 8