Rockwell-automation 1608P-200A480V... HC-DySC User Manual Manual de usuario Pagina 31

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 45
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 30
Rockwell Automation Publication 1608P-UM005A-EN-P - November 2014 31
Display Screen Chapter 5
System Configuration Press the “CONFIG” button at the bottom of the “HOME” screen to enter the
“System Configuration” screen (See Figure 27
). The “SET SYSTEM CLOCK”
and “CALIBRATE TOUCH SENSOR” functions are described at the start of
this chapter.
Figure 27 - System Configuration
Model Information Touch “VIEW MODEL INFORMATION” to go to the “Model Information
screen. (See Figure 28
).
Figure 28 - Model Information
Table 10 - Model Information
Description Function
Model Details
Model Number: System Model number
Serial Number: System serial number
System Rating: System voltage and current ratings
Unit Details
Node: The location index for the details listed to the right
Firm: The firmware version for the location indexed.
Type: Unique code specifying firmware part number for the location indexed.
Serial: The serial number for the location indexed
Volts: The rated voltage for the locations
Amps: The rated current for the location indexed
Vista de pagina 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 44 45

Comentarios a estos manuales

Sin comentarios