Rockwell-automation 1734-IE2C_2V POINT I/O 2 Current and 2 Voltage Inp Manual de usuario descargar pdf (Pagina 15)

POINT I/O 2 Current and 2 Voltage Input Analog Modules 15

Publication

1734-IN027A-EN-E - May 2005

Indication Probable Cause

Module Status

Off No power applied to device

Green Device operating normally

Flashing Green Device needs commissioning due to configuration missing,

incomplete or incorrec.

Flashing Red Recoverable fault

Red Unrecoverable fault may require device replacement

Flashing Red/Green Device is in self-test

Indication Probable Cause

Network Status

Off Device is not online

- Device has not completed dup_MAC_id test.

- Device not powered - check module status indicator

Flashing Green Device is online but has no connections in the established state

Green Device online and has connections in the established state

Flashing Red One or more I/O connections in timed-out state

Red Critical link failure - failed communication device. Device detected

error that prevents it communicating on the network.

Flashing

Red/Green

Communication faulted device - the device has detected a network

access error and is in communication faulted state. Device has

received and accepted an Identify Communication Faulted Request -

long protocol message.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Sin comentarios

Rockwell-automation 1734-IE2C_2V POINT I/O 2 Current and 2 Voltage Inp Manual de usuario Pagina 15