Rockwell-automation 1747-AENTR SLC to EtherNet/IP Adapter Installation Manual de usuario descargar pdf (Pagina 15)

SLC 500 EtherNet/IP Adapter 15

Publication 1747-IN521B-EN-E - January 2013

Specifications

Ethernet Communication

Attribute Value

EtherNet communication rate 10/100 Mbits/s, half or full-duplex

Ethernet ports 2, configured as Embedded Switch

Ethernet network topologies supported Star, Tree, Daisy chain/Linear, and Ring

Ethernet connector RJ-45, Category 5

Ethernet cable Category 5: shielded or unshielded

General Specifications

Attribute Value

Module location Always at Slot 0 (leftmost slot) on chassis

Current consumption, backplane 470 mA @ 5V DC

Thermal dissipation 2.49 W = 8.4962 Btu (IT)/hour

Isolation voltage 50V (continuous), Basic Insulation Type

Dimensions (HxWxD), approx. 145.3 x 34.8 x 130.8 mm

(5.72 x 1.37 x 5.15 in.)

Enclosure type rating None (open-style)

Wiring category

(1)

Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation

Wiring and Grounding Guidelines, publication 1770-4.1

1 – on communication ports

Weight, approx. 168 g (0.37 lbs.)

North American temp code T3C

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Rockwell-automation 1747-AENTR SLC to EtherNet/IP Adapter Installation Manual de usuario Pagina 15