Rockwell-automation 1747-AENTR SLC to EtherNet/IP Adapter Installation Manual de usuario descargar pdf (Pagina 7)

SLC 500 EtherNet/IP Adapter 7

Publication 1747-IN521B-EN-E - January 2013

Diagnostic Indicators

Health indicators are located on the front panel of the adapter module. They indicate both

normal operation and error conditions in your remote I/O system.

An alphanumeric display (net address/status) provides status code indications when an error

occurs during initialization or operation.

A complete description of the diagnostic indicators and status display and how to use them for

troubleshooting is explained on page 11.

Understand Messaging

Class 3 (Explicit Message) requests through the 1747-AENTR adapter to a specific I/O module

may not always receive a response from the I/O modules. In the case where the I/O module does

not reply to the request, the adapter responds with an error code indicating a time-out.

Establish I/O Connections

When you start a system and establish I/O connections, the outputs transition to the Idle state,

applying Idle state data before going to Run mode. This occurs even when the controller making

the connection is already in Run mode.

Left side view Right side view

Bottom view

Ethernet connectors (RJ-45)

45844

45845

45846

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Sin comentarios

Rockwell-automation 1747-AENTR SLC to EtherNet/IP Adapter Installation Manual de usuario Pagina 7