Rockwell-automation 1747-PCINT API Software for 1746 I/O Manual de usuario Pagina 87

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 155
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 86
OC_GetScannerStatus Library of Routines 6–33
Publication 1747-6.5.3 June 1998
OC_GetScannerStatus OC_GetScannerStatus reads the current status of the scanner.
Syntax:
int OC_GetScannerStatus(HANDLE handle, BYTE *scansts);
Parameters:
Description:
If OC_GetScannerStatus returns
SUCCESS, scansts has one of these values:
Return Value:
Considerations:
Supported in the DOS API library and the Windows NT API library
Parameter: Description:
handle
Must be a valid handle returned from OC_OpenScanner
scansts
Status of the scanner
This value:
Has this
hex value:
Means the:
SCANSTS_BPIC
4
POST backplane IC test failed; scanner is halted
SCANSTS_CRC
2
software CRC checksum failed
SCANSTS_DPR
5
POST dual port RAM test failed; scanner is halted
SCANSTS_FAULT
13
scanner faulted; scanner is in Scan mode
SCANSTS_IDLE
11
scanner initialized; scanner is in Idle mode
SCANSTS_INIT
10
POST passed; waiting for OC_InitScanner from host
SCANSTS_INT
8
POST interrupt test failed; scanner is halted
SCANSTS_POST
1
power-on self test (POST) is in progress
SCANSTS_RAM
3
POST RAM test failed; scanner is halted
SCANSTS_SCAN
20
scanner initialized; scanner in Scan mode
SCANSTS_THERM
6
POST thermometer test failed; scanner is halted
SCANASTS_TIMER
7
POST timer test failed; scanner is halted
SCANSTS_WDOG
12
scanner watchdog timeout; scanner is halted
Name: Value: Description:
SUCCESS
0
scanner status was read successfully
ERR_OCACCESS
2
handle does not have access to scanner
ERR_OCEXTERR
11
scanner extended error message (scansts is returned)
Vista de pagina 86
1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 154 155

Comentarios a estos manuales

Sin comentarios