Rockwell-automation 1756-EN2TSC EtherNet/IP Secure Communication User Manual de usuario descargar pdf (Pagina 43)

Rockwell Automation Publication ENET-UM003B-EN-P - September 2013 43

Configure a Secure Connection to a Microsoft Windows Client Chapter 3

Communicate to the Module

via an RSLinx Driver

If you communicate to the module through an RSLinx driver, you must use an

L2TP connection and the Ethernet devices (AB_ETH-1) driver.

Once the secure tunnel exists to the 1756-EN2TSC module, RSLinx software

uses the L2TP server IP addresses to communicate with the controller through

the 1756-EN2TSC module.

In the AB_ETH driver configuration, enter the L2TP server IP address (virtual

IP address) of the 1756-EN2TSC module to the Station Mapping dialog box.

IMPORTANT

The Microsoft Windows client must use the module IP address specified (predetermined) on the

L2TP configuration tab for all communication to the module, including RSLinx and Studio 5000

connections. The original IP address for the module is not in the VPN tunnel and cannot be used.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 63 64

Sin comentarios

Rockwell-automation 1756-EN2TSC EtherNet/IP Secure Communication User Manual de usuario Pagina 43