Rockwell-automation 1756-EN2TSC EtherNet/IP Secure Communication User Manual de usuario descargar pdf (Pagina 48)

48 Rockwell Automation Publication ENET-UM003B-EN-P - September 2013

Chapter 4 Configure Secure Communication Between Two 1756-EN2TSC Modules

Configure the Second

(Remote) Module

1. Choose Administrative Settings > Secure Tunnel Configuration > IPsec

Configuration and make sure that Enable IPsec is enabled.

2. To create a new secure association, do the following.

a. Enter the Identifier as a text description of the connection.

b. Choose the Peer to Peer as the Profile.

c. Enter the IP address of the first (local) module.

d. Enter the pre-shared key and confirm the pre-shared key.

3. Click Add.

4. Click Apply Changes after entering all configurations.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 63 64

Sin comentarios

Rockwell-automation 1756-EN2TSC EtherNet/IP Secure Communication User Manual de usuario Pagina 48