Rockwell-automation 1756-EN2TSC EtherNet/IP Secure Communication User Manual de usuario descargar pdf (Pagina 53)

Rockwell Automation Publication ENET-UM003B-EN-P - September 2013 53

Configure a Secure Connection to a VPN Appliance Chapter 5

Configure the Module to

Connect to a VPN Appliance

1. Choose Administrative Settings > Secure Tunnel Configuration > IPsec

Configuration and make sure that Enable IPsec is enabled.

2. To create a new secure association, do the following.

a. Enter the Identifier as a text description of the connection.

b. Choose the VPN Appliance as the Profile.

c. Enter the IP address of the VPN appliance.

d. Enter the pre-shared key and confirm the pre-shared key.

3. Click Add.

In This Field Specify

Identifier Name for the security association, such as VPN_connection

Profile VPN Appliance

Remote IP IP address of the VPN appliance

Pre-shared key Pre-shared key for the connection

Confirm Pre-shared key Same pre-shared key for the connection, as entered above

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 63 64

Sin comentarios

Rockwell-automation 1756-EN2TSC EtherNet/IP Secure Communication User Manual de usuario Pagina 53