Rockwell-automation 1768-EWEB CompactLogix EtherNet/IP Web Server Modu Manual de usuario descargar pdf (Pagina 19)

CompactLogix EtherNet/IP Web Server Module 19

Rockwell Automation Publication 1768-IN007B-EN-P - August 2010

Status Indicators

The module status indicators provides the following information:

Indicator Status Description

NET Off Module is not powered, or does not have an IP

address.

• Verify there is chassis power and the module is

completely inserted into the chassis and backplane.

• Make sure the module has been configured.

Flashing Green Module has obtained an IP address, but has no

established connections.

Green Module has an IP address and at least one established

connection.

Flashing Red One or more of the connections in which the module is

the target has timed out.

Red Module has detected that its IP address is already in

use. Assign a unique IP address to the module.

Link Off No data transmission.

Module is not ready to communicate.

Green Module is ready to communicate.

Flashing Green Data transmission in progress.

Module is communicating over the network.

OK Off Module does not have 5V DC power. Verify there is

power and the module is properly installed.

Flashing Green Standby mode. Module is not configured.

Green Module is operating correctly.

Flashing Red A minor, recoverable fault has been detected. This

could be caused by an error in the configuration.

Red A major, unrecoverable fault has been detected.

Recycle power to the module. If this does not clear the

fault, replace the module.

Flashing Red and

Green

Module performing power-up self-test.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Sin comentarios

Rockwell-automation 1768-EWEB CompactLogix EtherNet/IP Web Server Modu Manual de usuario Pagina 19