Rockwell-automation 1768-EWEB CompactLogix EtherNet/IP Web Server Modu Manual de usuario descargar pdf (Pagina 9)

CompactLogix EtherNet/IP Web Server Module 9

Rockwell Automation Publication 1768-IN007B-EN-P - August 2010

If You Are Using Screws to Mount Your Modules

The steps in these instructions show how to mount the modules on DIN rail.

If you are using screws instead of DIN rail, make these changes to the

instructions.

1. Follow the steps in Mount the Controller on the DIN Rail

on page 10 to

connect the modules together.

2. Use the modules as a template and mark pilot holes on your panel.

3. Drill the pilot holes for M4 or #8 screws.

4. Use M4 or #8 screws to mount the modules to your panel. Use 1.16

N•m (10 lb•in) of torque.

5. Ground the module on a ground bus with a dedicated earth ground

stake.

6. Connect the ground bus to a functional earth ground on the DIN rail or

panel.

7. Refer to Industrial Automation Wiring and Grounding Guidelines,

publication 1770-4.1

, for additional information.

IMPORTANT

Do not use screws and DIN rail to mount the modules. It is

possible to break the mounting tabs off if you screw the modules

to the panel while they are on DIN rail

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Sin comentarios

Rockwell-automation 1768-EWEB CompactLogix EtherNet/IP Web Server Modu Manual de usuario Pagina 9