Rockwell-automation 1768-EWEB CompactLogix EtherNet/IP Web Server Modu Manual de usuario descargar pdf (Pagina 8)

8 CompactLogix EtherNet/IP Web Server Module

Rockwell Automation Publication 1768-IN007B-EN-P - August 2010

What You Need

Install the Modules

Item Cat. No. or Size

1768 CompactLogix power supply 1768-PA3

1768 CompactLogix controller 1768-L43

1769 end cap

Connects to the controller as the

last module, either:

• without any 1769-series

modules attached to the

controller (1768-series only)

• with a combination of

1768-series and 1769-series

modules attached to the

controller

1769-ECR

RJ45 Ethernet connector See Wire the Module

on page 14

DIN rail or mounting screws (one

or the other but not both)

DIN rail Either of these sizes:

• 35 x 7.5 mm (EN 50 022 - 35 x 7.5)

• 35 x 15 mm (EN 50 022 - 35 x 15)

Screws M4 or #8 panhead screws

ATTENTION: This product is grounded through the DIN rail to

chassis ground. Use zinc-plated yellow-chromate steel DIN rail to

assure proper grounding. The use of other DIN rail materials (for

example, aluminum or plastic) that can corrode, oxidize, or are

poor conductors, can result in improper or intermittent grounding.

Secure DIN rail to mounting surface approximately every 200 mm

(7.87 in.) and use end-anchors appropriately.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Sin comentarios

Rockwell-automation 1768-EWEB CompactLogix EtherNet/IP Web Server Modu Manual de usuario Pagina 8