Rockwell-automation 1769-ADN Compact I/O DeviceNet Adapter Manual de usuario descargar pdf (Pagina 14)

14 Compact I/O 1769-ADN DeviceNet Adapter

Rockwell Automation Publication 1769-IN001C-EN-P - February 2013

RSNetWorx version 4.01 (or later) provides an updated configuration GUI with expanded

functionality for Series B adapters. When a Series B adapter is used to replace a Series A adapter,

this version of RSNetWorx converts the Series A adapter configuration information into the

format required by the Series B adapter after following these steps:

1. Upgrade your version of RSNetWorx to version 4.01 or later.

2. Open up the RSNetWorx file (*.dnt) that contains the Series A adapter’s configuration.

If no previously saved RSNetWorx file is available, go online with the Series A adapter

and upload it’s configuration and save it.

3. Replace the Series A adapter with the Series B adapter following the steps on page 15

4. Go online with RSNetWorx and browse the network.

RSNetWorx reports that there is a mismatch for the node address where the adapter

was replaced.

5. Double-click on the mismatched/replaced node.

6. Choose OK when asked to resolve the mismatch.

RSNetWorx updates the configuration and display the adapter’s General tab on its

property page, as noted in the message log window.

7. Choose the Module Configuration tab.

8. Choose Download to apply the configuration from the original Series A adapter to the

Series B adapter.

• For more information on setting adapter s electronic keying options, refer to the

1769-ADN User Manual, publication 1769-UM001

or the RSNetWorx for DeviceNet

software online help.

• For more information on setting the scanner’s electronic keying options, refer to the

scanner’s User Manual, publication 1769-UM009 or the RSNetWorx for DeviceNet

software online help.

• For more information on how to register the special EDS file with your older version of

RSNetWorx for DeviceNet software using the EDS Wizard, consult the RSNetWorx for

DeviceNet software online help.

TIP

If you choose Upload, the replacement adapter’s current state is uploaded,

resulting in the loss of the original Series A adapter’s configuration.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Sin comentarios

Rockwell-automation 1769-ADN Compact I/O DeviceNet Adapter Manual de usuario Pagina 14