Rockwell-automation 1771-IFE , D17716.5.90 USER MNL. ANALOG INPUT Modu Manual de usuario Pagina 20
- Pagina / 63
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Installing the Input Module
Chapter 2
2-8
When using shielded cable wire, ground the foil shield and drain wire only
at one end of the cable. We recommend that you wrap the foil shield and
drain wire together and connect them to a chassis mounting bolt
(Figure 2.6). At the opposite end of the cable, tape exposed shield and
drain wire with electrical tape to insulate it from electrical contact.
Figure 2.6
Cable
Grounding
Remove a length of cable
jacket from the Belden 8761
cable.
Pull the foil shield and bare
drain wire from the insulated
wires.
Bare
drain
wire
Insulated
wires
Foil
shield
Twist the foil shield and drain
wire together to form a single
strand.
Attach a ground lug.
20104
Belden
8761 Cable
19480
When you connect grounding conductors to the I/O chassis
grounding stud, place a star washer under the first lug, then
place a nut with captive lock washer on top of each ground lug.
Grounding Stud
1
Use
the cup washer if crimpon lugs are not used.
Chassis Ground Singlepoint Grounding
Ground Lug
Nut
Ground Lug
1
Star
Washer
I/O Chassis Side Plate
Nut and Captive
Washer
Externaltooth Washers
#10 Threadforming screw
19923
Shield and Drain
twisted together
Shield and Drain
twisted together
Refer
to Wiring and Grounding Guidelines, publication 17704.1 for additional information.
Grounding
- Analog Input Module 1
- Cat. No. 1771IFE 1
- Important User Information 2
- Summary of Changes 3
- Table of Contents 4
- Table of Contentsii 5
- Table of Contents iii 6
- Using This Manual 7
- Related Products 8
- Product Compatibility 8
- Publications 9
- Objectives 10
- Module Description 10
- Features 10
- How Analog Modules 11
- Communicate with 11
- Programmable Controllers 11
- Chapter Summary 12
- Accuracy 12
- Installing the Input Module 13
- Power Requirements 14
- Module Location in the I/O 14
- Module Keying 14
- Grounding 20
- Changing the Module's 21
- Configuration 21
- 12677 12678 22
- Either dif 23
- Module Installation 24
- Indicator Lights 24
- Module Programming 25
- PLC2 Programming 26
- PLC3 Programming 27
- PLC5 Programming 28
- Configuring Your Module 30
- Input Range Selection 31
- Input Type 32
- Data Format 32
- Digital Filtering 33
- Real Time Sampling 34
- Scaling Ranges 35
- Default Configuration 37
- Module Status and Input Data 39
- Block Transfer Read Format 40
- Calibrating Your Module 41
- Adjusting the 10V Reference 42
- Objective 44
- Diagnostics Reported by the 44
- Chapter 7 45
- Specifications 47
- Programming Examples 48
- Family Processor 49
- Appendix B 50
- Figure B.2 50
- Family Processors 51
- Data Table Formats 52
- Signedmagnitude Binary 53
- Two's Complement Binary 54
- Processors) 55
- Setting the Block Length 57
- (Multiple GET Instructions 57
- Appendix 58
- Analog Block Transfer Read 59
- Analog Block Transfer Write 60
- Supersedes 63
- Copyright 63
- 1994 AllenBradley Company 63
- , Inc. Printed in USA 63
Relacionado con productos y manuales para Equipo Rockwell-automation 1771-IFE , D17716.5.90 USER MNL. ANALOG INPUT Modu
Equipo Rockwell-automation 1789-L10_L30_L60 SoftLogix 5800 Controller Install Manual de usuario
(14 paginas)
(14 paginas)
Equipo Rockwell-automation 1734-OV2E_4E_8E POINT I/O Protected Sink Output Mo Manual de usuario
(28 paginas)
(28 paginas)
Equipo Rockwell-automation 1732D-8X81212HD DNet ArmorBlock Network and Auxili Manual de usuario
(24 paginas)
(24 paginas)
Equipo Rockwell-automation 1786-RPFM ControlNet Modular Repeater Med-distance Manual de usuario
(20 paginas)
(20 paginas)
Equipo Rockwell-automation 1784-PM16SE 16 Axis PCI SERCOS interface Card Inst Manual de usuario
(28 paginas)
(28 paginas)
Equipo Rockwell-automation 1734D-IB16 PointBlock 16 dc Input Module Installat Manual de usuario
(10 paginas)
(10 paginas)
Equipo Rockwell-automation 1771-IAD AC/DC (120V)Input Installation Instructio Manual de usuario
(12 paginas)
(12 paginas)
Equipo Rockwell-automation Logix5000 Controllers IEC 61131-3 Compliance Progr Manual de usuario
(22 paginas)
(22 paginas)
Equipo Rockwell-automation 1738-IB4DM12 ArmorPoint 24V dc 4-channel Digital I Manual de usuario
(14 paginas)
(14 paginas)
Equipo Rockwell-automation 1783-EMS08T Stratix 6000 Ethernet Managed Switch U Manual de usuario
(94 paginas)
(94 paginas)
Equipo Rockwell-automation 1738-AENT ArmorPoint EtherNet/IP Adapter, Series A Manual de usuario
(16 paginas)
(16 paginas)
Equipo Rockwell-automation 1734-SSI POINT I/O Synchronous Serial Interface En Manual de usuario
(20 paginas)
(20 paginas)
Equipo Rockwell-automation 1769-OW8I Compact Individually Isolated AC/DC Rela Manual de usuario
(20 paginas)
(20 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.052 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales