Rockwell-automation 1771-IJ_IK IK ENCODER/COUNTER MODULES Manual de usuario descargar pdf (Pagina 20)

2–8 Preliminary Adjustments

Publication 1771ĆUM006B-EN-P - June 2002

3. Set the switches of SW-1 (Table 2.E) according to the desired

programming options. The settings for the count resolution

switches (times 1, 2, or 4) do not matter if the counter mode has

been selected. The tip of a ball point pen can be used to set the

rocker arm of a switch. Do not use a pencil because the point can

break off and jam the switch.

4. Set the three switches of SW-2 (Table 2.E) according to the input

configurations that have been chosen.

5. Replace the component cover and tighten the screws.

Table 2.E

Programming Option Switch Assembly SWĆ1

1 2, 3 4 5

Single

Transfer

See Table 2.B

Multiplier for

Count

Resolution

Encoder

Mode

Binary

Off Block

Transfer

Counter

Mode BCD

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 67 68

Sin comentarios

Rockwell-automation 1771-IJ_IK IK ENCODER/COUNTER MODULES Manual de usuario Pagina 20