Rockwell-automation 1784-KTCS ControlNET Scanner Installation Instruct Manual de usuario descargar pdf (Pagina 16)

16 ControlNet Scanner Card

Publication

1784-5.35 – April 1999

Inserting the Card

To insert the card inside the computer:

1. Follow the card handling instructions on page 4.

Make sure you have correctly set all of the switches on the card.

3. Insert the card into the edge connector and tighten the expansion slot screw.

4. Turn on the computer to make sure it powers up correctly.

If the computer: then:

powers up

go to step 5

does not power up correctly you probably have a memory or I/O conflict

You should

• change switch settings and cycle power, or

• remove all other cards and try again

If you are still unsuccessful, contact your local

Rockwell Automation sales representative or

distributor, or Rockwell Automation Technical

Support at (440) 646-6800.

5. Replace the CPU cover (when computer powers up correctly).

Installing IOLinx Software

Important: IOLinx software requires Microsoft Windows NT 4.0 or later.

Follow these steps to install the IOLinx software.

Insert the CD in the CD-ROM drive.

Important: We strongly recommend that you exit all Windows

programs before running this Setup program.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Sin comentarios

Rockwell-automation 1784-KTCS ControlNET Scanner Installation Instruct Manual de usuario Pagina 16