Rockwell-automation 1784-KTS_KTX_KTXD User Manual Communication Interf Manual de usuario descargar pdf (Pagina 23)

1784-6.5.22 - November 1999

Configure the Card Hardware 2-7

Select the Interrupt Setting

Important: If you need to use the KTx as a remote I/O scanner within a

SoftLogix5 system, you must set an interrupt for the scanner

channel

Important: When selecting configuration settings, check for conflicts with

other interface cards and system memory. If there is a conflict, the

system will not operate properly. To avoid the conflict, select a

unique interrupt setting for each channel. If another card is already

using a channel’s default interrupt, you must pick a new interrupt

for the channel.

About KT

Interrupts

The 1784-KTx cards are set to these interrupt(s):

Catalog Number Channel Interrupt

1784-KTS 1 no interrupt

1784-KTX 1

1784-KTXD 1

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 95 96

Sin comentarios

Rockwell-automation 1784-KTS_KTX_KTXD User Manual Communication Interf Manual de usuario Pagina 23