Rockwell-automation 1794-AENTR_AENTRXT FLEX I/O Dual Port EtherNet/IP Manual de usuario descargar pdf (Pagina 32)

Publication 1794-UM066A-EN-P - February 2012

24 Rack Optimized Discrete I/O

To work along with this example set up your system as shown above.

• Note that in the example application, the Logix5572 controller and

1756-EN2TR module are assumed to be in the slots shown above.

• Verify the IP addresses for your programming terminal, 1756-EN2TR

module, and 1794-AENTR adapter.

• Verify the position (slot) of the I/O modules on the DIN rail.

• Verify that all wiring and cabling is properly connected.

• Make sure your communication driver (for example, AB_ETH-1 or

AB-ETHIP-1) is configured in RSLinx as described in Appendix C

Create the Example

Application

Perform the following steps to create the example application:

Local

chassis

FLEX I/O

Logix5572c

ontroller

1794-OB16

digital output

1794-IB16

digital input

1756-EN2TR

130.130.130.2

1794-AENTR

130.130.130.3

Data

Programming

terminal

130.130.130.1

SLOT 1 2

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 87 88

Sin comentarios

Rockwell-automation 1794-AENTR_AENTRXT FLEX I/O Dual Port EtherNet/IP Manual de usuario Pagina 32