Rockwell-automation 1794-FLA FlexLogix Controller Installation Instruc Manual de usuario descargar pdf (Pagina 10)

10 FlexLogix Controller System

Publication 1794-IN002G-EN-P - January 2004

Step 2: Install the Battery

For Safety information on the handling of lithium batteries, including handling and

disposal of leaking batteries, see Guidelines for Handling Lithium Batteries,

publication AG 5-4.

1. Install a 1756-BA1 battery.

2. Attach the battery label:

a. Write on the battery label the date you install the battery.

b. Attach the label to the inside of the battery compartment.

ATTENTION

Only install a 1756-BA1 battery. If you install a different battery,

you may damage the controller.

WARNING

For safety information on the handling of lithium batteries, in-

cluding the handling and disposal of leaking batteries, see Guide-

lines for Handling Lithium Batteries, publication AG-5.4.

Store batteries in a cool, dry environment. We recommend 25°C

with 40% to 60% relative humidity. You may store batteries for

up to 30 days between -45° to 85°C, such as during transporta-

tion. To avoid possible leakage, do not store batteries above 60°C

for more than 30 days.

When you connect or disconnect the battery an electrical arc can

occur. This could cause an explosion in hazardous location in-

stallations. Be sure that power is removed or the area is nonhaz-

ardous before proceeding.

Attach battery here.

top red lead (+)

middle black lead (-)

bottom no connection

Attach label here.

This jumper is for service use

only. Do not use this jumper.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Sin comentarios

Rockwell-automation 1794-FLA FlexLogix Controller Installation Instruc Manual de usuario Pagina 10