Rockwell-automation 1794-FLA FlexLogix Controller Installation Instruc Manual de usuario descargar pdf (Pagina 17)

FlexLogix Controller System 17

Publication 1794-IN002G-EN-P - January 2004

7. Connect the adapter to the controller.

The following diagram shows how you can also use the 1794-CE1, -CE3

cable to split a rail of I/O. You can split each rail only once. You can split a

rail right after the controller (or adapter) or after any I/O module. For more

information about the 1794-CE1, -CE3 cables, see the Interconnect Cable

Installation Instructions, publication 1794-5.12.

Removing the extended-local adapter

If you need to remove the adapter, follow these steps:

1. Turn off power to the adapter.

2. Disconnect all cables from the adapter.

3. Remove the I/O module that is adjacent to the adapter.

4. On the terminal base adjacent to the adapter, slide the FLEXBUS connector

away from the adapter and remove the I/O terminal base.

5. Remove the adapter from the DIN rail.

31039-M

1794-CE1 or

1794-CE3 cable

LOCAL rail

LOCAL2 rail

1794-CE1 or

1794-CE3 cable

1794-CE1 or

1794-CE3 cable

1794-CE1 or

1794-CE3 cable

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Sin comentarios

Rockwell-automation 1794-FLA FlexLogix Controller Installation Instruc Manual de usuario Pagina 17