Rockwell-automation 1794-FLA FlexLogix Controller Installation Instruc Manual de usuario descargar pdf (Pagina 14)

14 FlexLogix Controller System

Publication 1794-IN002G-EN-P - January 2004

6. Mount the I/O terminal bases on the DIN rail.

For information about I/O terminal bases, see the FLEX I/O Terminal Base

Installation Instructions, publication 1794-IN092.

7. Install the I/O modules.

To install an I/O module, see the installation instructions for that module.

Removing the controller

If you need to remove the controller, follow these steps:

1. Turn off power to the controller.

2. Disconnect all cables from the controller.

3. Remove the I/O module that is adjacent to the controller.

4. On the terminal base adjacent to the controller, slide the FLEXBUS connector

away from the controller and remove the I/O terminal base.

5. Remove the controller from the DIN rail.

31036-M

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Sin comentarios

Rockwell-automation 1794-FLA FlexLogix Controller Installation Instruc Manual de usuario Pagina 14