Rockwell-automation 20P PowerFlex DC Drive - Frame A Field SCR/Dual Di Manual de usuario

Busca en linea o descarga Manual de usuario para Equipo Rockwell-automation 20P PowerFlex DC Drive - Frame A Field SCR/Dual Di. Rockwell Automation 20P PowerFlex DC Drive - Frame A Field SCR/Dual Diode Bridge Module User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 14
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
Installation Instructions
PowerFlex
®
DC Drive - Frame A Field SCR/Dual
Diode Bridge Module
What This Kit Includes
Field SCR/Dual Diode Bridge module and cables
Two screws for Field SCR/Dual Diode Bridge module
Thermal grease
Static strap
Important:It is highly recommended that the Field circuit board be
replaced when replacing the Field SCR/Dual Diode Bridge
module. The Field circuit board is sold as a separate spare part
kit.
Tools That You Need
Phillips
®
screwdriver
Flathead screwdriver
Phillips
®
is a registered trademark of Phillips Screw Company.
ATTENTION: Only qualified personnel familiar with DC
drives and associated machinery should plan or implement the
installation, start-up and subsequent maintenance of the system.
Failure to comply may result in personal injury and/or equipment
damage.
ATTENTION: To avoid an electric shock hazard, ensure that
all power to the drive has been removed before performing the
following.
ATTENTION: This drive contains ESD (Electrostatic
Discharge) sensitive parts and assemblies. Static control
precautions are required when installing, testing, servicing or
repairing this assembly. Component damage may result if ESD
control procedures are not followed. If you are not familiar with
static control procedures, reference A-B publication 8000-4.5.2,
“Guarding Against Electrostatic Damage” or any other
applicable ESD protection handbook.
Vista de pagina 0
1 2 3 4 5 6 ... 13 14

Indice de contenidos

Pagina 1 - Diode Bridge Module

Installation InstructionsPowerFlex® DC Drive - Frame A Field SCR/Dual Diode Bridge Module What This Kit Includes• Field SCR/Dual Diode Bridge module a

Pagina 2 - Step 1: Remove Power

10 PowerFlex® DC Drive - Frame A Field SCR/Dual Diode Bridge Module8. Remove the six screws that secure the Pulse Transformer board (and Switching Pow

Pagina 3 - Protective Covers

PowerFlex® DC Drive - Frame A Field SCR/Dual Diode Bridge Module 11Step 5: Remove the Existing Field SCR/Dual Diode Bridge Module1. Remove the four bu

Pagina 4

12 PowerFlex® DC Drive - Frame A Field SCR/Dual Diode Bridge ModuleStep 6: Install the New Field SCR/Dual Diode Bridge ModuleInstall the new Field SCR

Pagina 5 - Control Board

PowerFlex® DC Drive - Frame A Field SCR/Dual Diode Bridge Module 13Step 9: Replace the Protective Covers and Documenting the Change1. Replace the prot

Pagina 6 - Power Supply Boards

Publication 20P-IN044B-EN-P - December 2009Supersedes 20P-IN044A-EN-P - March 2009 Copyright © 2009 Rockwell Automation. All rights reserved. Printed

Pagina 7 - Remove screw

2 PowerFlex® DC Drive - Frame A Field SCR/Dual Diode Bridge ModuleWhat You Need to DoThe Field SCR/Dual Diode Bridge module is located on the heat sin

Pagina 8

PowerFlex® DC Drive - Frame A Field SCR/Dual Diode Bridge Module 3Step 2: Remove the Protective Covers1. Remove the two screws that secure the power t

Pagina 9

4 PowerFlex® DC Drive - Frame A Field SCR/Dual Diode Bridge Module4. Press in on the sides at the bottom edge of the top cover and at the same time pu

Pagina 10 - Remove six screws

PowerFlex® DC Drive - Frame A Field SCR/Dual Diode Bridge Module 5Step 3: Remove the Control EMI Shield and Control Board1. Carefully disconnect the c

Pagina 11 - Existing Field SCR/Dual

6 PowerFlex® DC Drive - Frame A Field SCR/Dual Diode Bridge Module3. Remove the four screws (and ground wire on the lower left corner of board) that s

Pagina 12

PowerFlex® DC Drive - Frame A Field SCR/Dual Diode Bridge Module 71. Remove the air flow plate from the top of the drive:– For 38A and 55A drives @ 23

Pagina 13 - Related Documentation

8 PowerFlex® DC Drive - Frame A Field SCR/Dual Diode Bridge Module2. Remove the plug-in control power terminal block from the Pulse Transformer circui

Pagina 14

PowerFlex® DC Drive - Frame A Field SCR/Dual Diode Bridge Module 96. Remove the appropriate gate leads:– For regenerative drives, remove each pair of

Comentarios a estos manuales

Sin comentarios