Rockwell-automation 20P PowerFlex DC Drive - Frame A Field SCR/Dual Di Manual de usuario Pagina 8

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 14
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 7
8 PowerFlex® DC Drive - Frame A Field SCR/Dual Diode Bridge Module
2. Remove the plug-in control power terminal block from the Pulse
Transformer circuit board.
3. Remove the cables from connectors X3 and XP on the Pulse
Transformer board.
4. For drives with a fan, remove the cable from connector X4 on the Pulse
Transformer board.
5. For Pulse Transformer boards with an armature voltage feedback
terminal block, FIR1-XX, rev “Q” and higher, remove the connector
from XCD_IO on the upper left corner of the board.
Remove
plug-in
terminal
block
Remove cables from X3 and XP
Remove cable from X4 for drives with a fan
XSW1
XSW
X3
XP
TR2 TR1
XR
X4
XY
XCD_IO
Remove connector
from XCD_IO
Vista de pagina 7
1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comentarios a estos manuales

Sin comentarios