Rockwell-automation 20P PowerFlex DC Drive - Frame C Pulse Transformer Manual de usuario Pagina 4

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 16
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 3
4 Rockwell Automation Publication 20P-IN010C-EN-P - February 2012
PowerFlex DC Drive Frame C Pulse Transformer Circuit Board
4. Disconnect the HIM Communication cable from the connector on the
upper right corner of the Control board and set the cover aside.
Step 3: Remove the Existing
Pulse Transformer
Board
You must move the Control EMI shield that holds the Control board in order to
access the Pulse Transformer circuit board.
1. Carefully disconnect the cables from connectors XFCD and XR on the
Control board.
Pull tabs out to
disconnect cable.
=
Disconnect
cables
Vista de pagina 3
1 2 3 4 5 6 7 8 9 ... 15 16

Comentarios a estos manuales

Sin comentarios