Rockwell-automation 21G PowerFlex 755 Transition Section and Splicing Manual de usuario descargar pdf (Pagina 13)

Rockwell Automation Publication 750-IN027C-EN-P - November 2013 13

PowerFlex 755 Transition Section and Splicing Kit for Floor-mount Drives and CENTERLINE 2100 Motor Control Centers

Step 6 (Left): Connect PE Splicing Cables

1. Pass the cables through the bottom wireway openings.

2. Connect the PE splicing cables between the MCC and drive PE bus bars.

1/4-20

7.3 N•m (65 lb•in)

10 mm

➊

➌

➋

1/4-20 x 1 in.

1/4-20 x 1.25 in.

No. Description Hardware

➊ 1200A with 25.4 mm (1 in.) bus bar. Requires two splice cables.

See Table 3

for a list of

required hardware.

➋ 2000A with 25.4 mm (1 in.) bus bar. Requires two splice cables.

2000A with 50.8 mm (2 in.) bus bar. Requires three splice cables.

➌ 3000A with 50.8 mm (2 in.) bus bar. Requires three splice cables.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 25 26

Sin comentarios

Rockwell-automation 21G PowerFlex 755 Transition Section and Splicing Manual de usuario Pagina 13