Rockwell-automation 21G PowerFlex 755 Transition Section and Splicing Manual de usuario descargar pdf (Pagina 2)

2 Rockwell Automation Publication 750-IN027C-EN-P - November 2013

PowerFlex 755 Transition Section and Splicing Kit for Floor-mount Drives and CENTERLINE 2100 Motor Control Centers

Additional Resources

The following table lists publications that provide general PowerFlex 755 drives

and CENTERLINE 2100 MCC related information.

You can view or download publications at

http://www.rockwellautomation.com/literature/

To order paper copies of technical documentation, contact your local Allen-

Bradley distributor or Rockwell Automation sales representative.

What the Kits Contain

A complete installation requires one transition section and one bus bar splicing

kit. Depending on the catalog number ordered, the kit will be a left-side mount or

a right-side mount relative to the drive. Kits include all joining and splicing

hardware. An IP20, NEMA/UL Type 1 enclosure results when kits are installed

according to these instructions. If a NEMA Type 12 structure is required, follow

the CENTERLINE Motor Control Centers NEMA Type 12 Sealing

Instructions, publication 2100-IN037

Resource Description

PowerFlex 750-Series AC Drives Installation Instructions,

publication 750-IN001

Provides detailed information on:

• Installation requirements

• Additional safety requirements

• Drive assembly removal and handling

• Approximate dimensions

CENTERLINE 2100 Low Voltage Motor Control Centers

Installation Instructions, publication 2100-IN012

Provides detailed information on:

• Installation requirements

• Handling instructions

• Approximate dimensions

CENTERLINE Motor Control Centers NEMA Type 12 Sealing

Instructions, publication 2100-IN037

Provides detailed information on:

• Sealing NEMA Type 12 structures

Left-side Kits Right-side Kits Amp

Rating

MCC Bus Bar Position Mounting

Channel

20-750-XBUS-LHNB-1200 20-750-XBUS-RHNB-1200 1200 Standard (15 and 20 in. deep) For use

with MCCs

that have

1.5 inch

mounting

channels.

20-750-XBUS-LHNB-2000 20-750-XBUS-RHNB-2000 2000 Standard (15 and 20 in. deep)

20-750-XBUS-LHNB-3000 20-750-XBUS-RHNB-3000 3000 Standard (15 and 20 in. deep)

20-750-XBUS-LHBB-1200 20-750-XBUS-RHBB-1200 1200 Bumped Back (20 in. deep)

20-750-XBUS-LHBB-2000 20-750-XBUS-RHBB-2000 2000 Bumped Back (20 in. deep)

20-750-XBUS-LHBB-3000 20-750-XBUS-RHBB-3000 3000 Bumped Back (20 in. deep)

20-750-XSEC-LH-20G

(1)

(1) Hardware is included to install the optional 1.5 mounting channel.

20-750-XSEC-RH-20G

(1)

N/A 20 in. deep transition section N/A

20-750-XBUS-LLNB-1200 20-750-XBUS-RLNB-1200 1200 Standard (15 and 20 in. deep) For use

with MCCs

that do not

have

mounting

channels.

20-750-XBUS-LLNB-2000 20-750-XBUS-RLNB-2000 2000 Standard (15 and 20 in. deep)

20-750-XBUS-LLNB-3000 20-750-XBUS-RLNB-3000 3000 Standard (15 and 20 in. deep)

20-750-XBUS-LLBB-1200 20-750-XBUS-RLBB-1200 1200 Bumped Back (20 in. deep)

20-750-XBUS-LLBB-2000 20-750-XBUS-RLBB-2000 2000 Bumped Back (20 in. deep)

20-750-XBUS-LLBB-3000 20-750-XBUS-RLBB-3000 3000 Bumped Back (20 in. deep)

20-750-XSEC-BH-15G

(2)

(2) The 15 in. deep transition section can be mounted on the left side or the right side of the PowerFlex 755 drive cabinet.

N/A 15 in. deep transition section N/A

1 2 3 4 5 6 7 ... 25 26

Comentarios a estos manuales

Sin comentarios

Rockwell-automation 21G PowerFlex 755 Transition Section and Splicing Manual de usuario Pagina 2

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation 21G PowerFlex 755 Transition Section and Splicing