Rockwell-automation 2706-NP3 DL20 OFFLINE PROGRAMMING MANUAL Manual de usuario descargar pdf (Pagina 50)

Transferring S Record Files

Chapter 7

7–10

This section shows how to transfer an S Record file from a 1770-SB Data

Recorder to a personal computer.

Before starting the upload, make sure the recorder is connected to your

computer as described on page 7–3.

To upload an S Record file from the data recorder to your computer:

1. Select option 8 - S Record/Message File Upload (Read)/Download

(Write) from the Main Menu.

The File Read/Write Functions submenu appears.

2. Select option 3 - Read 1770-SB Cartridge to Disk File.

The following screen appears. It prompts you to type the name of an S

Record file to receive the data.

3. Set the baud rate of the data recorder to same baud rate shown on screen.

4. Verify that a tape cartridge is installed in the data recorder.

5. Verify that the ”Track Select” switch on the recorder is set to the

correct track.

Uploading File from

Data Recorder

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 66 67

Sin comentarios

Rockwell-automation 2706-NP3 DL20 OFFLINE PROGRAMMING MANUAL Manual de usuario Pagina 50