Rockwell-automation 2711C-xxxx PanelView Component HMI Terminals Quick Manual de usuario descargar pdf (Pagina 39)

Publication 2711C-QS001F-EN-P - November 2010 39

Configure Communication Chapter 4

Configure DF1 Communication

This topic shows how to configure runtime settings to enable DF1 point-to-point communication between

your PanelView Component terminal and a MicroLogix 1100 controller. The DF1 settings for the PanelView

Component terminal match the default settings of the MicroLogix controller.

1. Click the Communication

tab to open the

Communication view.

2. Select Serial under Protocol

and DF1 from the pull-down

list.

3. Under PanelView

Component Settings, verify

the Station Address is 2.

4. Under Controller Settings:

a. Accept the default name

PLC-1.

b. Select MicroLogix from

the Controller Type field.

c. Type 1 in the Address

field.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 109 110

Comentarios a estos manuales

Sin comentarios