Rockwell-automation 57C400-1 115V AC/DC Input Module Manual de usuario descargar pdf (Pagina 14)

3Ć4

Toggle each of the input devices connected to the input

module one at a time to verify that the installation has

been completed correctly.

  

Use the following procedure to replace a module:

Step 1. Turn off power to the rack and all connections.

Step 2. Use a screwdriver to loosen the screws holding the

connector to the module. Remove the connector.

Step 3. Loosen the screws that hold the module in the rack.

Remove the module from the slot in the rack.

Step 4. Place the module in the antiĆstatic bag it came in, being

careful not to touch the connectors on the back of the

module. Place the module in the cardboard shipping

container.

Step 5. Take the new module out of the antiĆstatic bag, being

careful not to touch the connectors on the back of the

module.

Step 6. Insert the module into the desired slot in the rack. Use a

screwdriver to secure the module into the slot.

Step 7. Attach the field terminal connector (M/N 57C370) to the

mating half on the module. Make certain that the

connector keys are oriented correctly and that the

connector is the proper one for this module (see step 6 in

3.2 Initial Installation). Use a screwdriver to secure the

connector to the module.

Step 8. Turn on power to the rack.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Sin comentarios

Rockwell-automation 57C400-1 115V AC/DC Input Module Manual de usuario Pagina 14