Rockwell-automation 61C365 4 Output 4-20mA Analog Rail Manual de usuario descargar pdf (Pagina 19)

3Ć5

Channel 0

Channel 1

Channel 2

Channel 3

-++-



Load

Source

IĆOut

Common

-++-



Load

Source

IĆOut

Common

IĆOut

Common

IĆOut

Common

-++-



Load

Source

-++-



Load

Source

Figure 3.2 Ć Typical Recommended Output Shielding Methods

Step 11. Turn off power to the Reliance device that will be

connected to the Analog Rail module.

Step 12. Set the Mode" switch on the faceplate of the Analog Rail

module to the desired position.

Step 13. Connect the I/O Rail cable between the Analog Rail

connection labeled Input" and an I/O port on the

Reliance device that will communicate with the module.

Turn on power to the Reliance device that will

communicate with the Analog Rail module. Recall that the

Mode switch is read each time the Reliance device

connected to the module is powered up.

Step 14. The Analog Rail installation is now ready for testing.

Inspect all work to assure that the installation has been

performed properly.

Step 15. Turn on power to the Input Power" wiring. Turn on power

to the external hardware. Recall that external hardware

being powered by the output of the Analog Rail module

must be in series with an external power supply. See

figure 3.2. See Appendix A for the power supply

specifications.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 45 46

Comentarios a estos manuales

Sin comentarios

Rockwell-automation 61C365 4 Output 4-20mA Analog Rail Manual de usuario Pagina 19

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation 61C365 4 Output 4-20mA Analog Rail